B&R from Foxmere

- Part Number
- Description
- Availability
- X20cDC2190
- This module can be used to determine paths and to calculate speeds at the same time. The ultrasonic transducer rods are connected directly to the RS422 interface. Communication to the transducer rod takes place using start/stop signals. With the DPI/IP protocol, it is also possible, for example, to read operational properties directly from the transducer. During service (when a transducer is being exchanged) the machine can be started again quickly without additional configuration work. The module is designed for connecting 2 transducer rods with a total of up to 4 paths. That means, for example, that 2 ultrasonic transducers with 2 magnets each or one with 4 magnets can be used. The combination 3/1 is also possible. The module provides 24 VDC as an external supply for the sensor.
- Available
- X20cDC2395
- This module is a multifunctional counter module. It can be connected to one SSI encoder, one ABR encoder, two AB encoders or four event counters. Two outputs are available for pulse width modulation. The functions can also be mixed.
- Available
- X20cDI4371
- The module is equipped with 4 inputs for 3-wire connections.
- Available
- X20cDI4375
- The module is equipped with 4 inputs for 3-wire connections. It has open circuit and short circuit detection. This detection can be switched off individually for each channel.
- Available
- X20cDI4760
- The module is used to transfer digital signals from NAMUR encoders according to EN 60947-5-6. In addition to NAMUR encoders, normal switches can also be used.
- Available
- X20cDI6371
- The module is equipped with 6 inputs for 1 or 2-wire connections. The X20 6-pin terminal block can be used for universal 1-line wiring. Two-line wiring can be implemented using the 12-pin terminal block. The inputs on the module are designed for sink connections.
- Available
- X20cDI6372
- The module is equipped with 6 inputs for 1 or 2-wire connections. The X20 6-pin terminal block can be used for universal 1-line wiring. Two-line wiring can be implemented using the 12-pin terminal block. The inputs on the module are designed for source connections.
- Available
- X20cDI9371
- The module is equipped with 12 inputs for 1-wire connections. The module is designed for sink input wiring.
- Available
- X20cDI9372
- The module is equipped with 12 inputs for 1-wire connections. The module is designed for source input wiring.
- Available
- X20cDIF371
- The module is equipped with 16 inputs for 1-wire connections. The module is designed for sink input wiring.
- Available
- X20cDM9324
- This module is equipped with 8 inputs and 4 outputs for 1-wire connections. The inputs are designed for sink connections, the outputs for source connections.
- Available
- X20cDO2633
- The module is a digital output module with phase-angle control that is equipped with 2 Triac outputs using 3-line connections. The supply (L and N) is fed directly to the module.
- Available
- X20cDO4322
- The module is equipped with 4 outputs for 3-wire connections.
- Available
- X20cDO4332
- The module is equipped with 4 outputs for 3-wire connections. The rated output current is 2 A.
- Available
- X20cDO4332-1
- The module is equipped with 4 outputs for 3-wire connections. The nominal output current is 2 A.
- Available
- X20cDO4649
- The module is equipped with 4 relay outputs.
- Available
- X20cDO6321
- The module is equipped with 6 outputs for 1 or 2-wire connections. The X20 6-pin terminal block can be used for universal 1-line wiring. 2-line wiring can be implemented using the 12-pin terminal block. The X20DO6321 is designed for sink output wiring.
- Available
- X20cDO6322
- The module is equipped with 6 outputs for 1 or 2-wire connections. The X20 6-pin terminal block can be used for universal 1-line wiring. 2-line wiring can be implemented using the 12-pin terminal block. The module is designed for source output wiring.
- Available
- X20cDO6529
- The module is equipped with 6 relay outputs.
- Available
- X20cDO6639
- The module is equipped with 6 relay outputs.
- Available
- X20cDO8331
- The module is equipped with 8 outputs for 1-wire connections. The rated output current is 2 A. The output supply is fed directly to the module. An additional supply module is not needed. There is no connection between the module and the I/O supply potential on the bus module.
- Available
- X20cDO8332
- The module is equipped with 8 outputs for 1-wire connections. The rated output current is 2 A. The output supply is fed directly to the module. An additional supply module is not needed. There is no connection between the module and the I/O supply potential on the bus module.
- Available
- X20cDO9321
- The module is equipped with 12 outputs for 1-wire connections. The module is designed for sink output wiring.
- Available
- X20cDO9322
- The module is equipped with 12 outputs for 1-wire connections. The module is designed for source output wiring.
- Available
- X20cDOF322
- The module is equipped with 16 outputs for 1-wire connections. The module is designed for source output wiring.
- Available

Trusted by…

Trusted by industry leaders