-
- Part Number
- Description
- Availability
-
- 5AC901.FF05-01
- Front cover for 5-slot APC910, Dark gray
- Available
-
- 5AC901.FF05-02
- Front cover for 5-slot APC910, Dark gray, Without logo
- Available
-
- 5AC901.FI01-00
- APC910 air filter, For 1-slot APC910, 5 pieces
- Available
-
- 5AC901.FI02-00
- APC910 air filter, For 2-slot APC910, 5 pieces
- Available
-
- 5AC901.FI03-00
- APC910 replacement fan filter for 5AC901.FA03-00; 5 pcs.
- Available
-
- 5AC901.FI05-00
- APC910 air filter, For 5-slot APC910, 5 pieces
- Available
-
- 5AC901.FRAM-00
- The 5AC901.FRAM-00 replacement disk tray can be installed on the APC910 in order to exchange a slide-in compact drive as quickly as possible. It can be used to store the replacement drive. For the tray to hold securely, the 4 clips on the back must be bent to the left or right.
- Available
-
- 5AC901.HS00-00
- The 5AC901.HS00-00 heat sink has cooling fins and heat pipes for improved heat dissipation. It is only used together with system units that have fan kits.
- Available
-
- 5AC901.HS00-01
- APC910 active heat sink QM170/HM170
- Available
-
- 5AC901.HS00-02
- APC910 active heat sink CM236
- Available
-
- 5AC901.HS01-00
- The 5AC901.HS01-00 heat sink has cooling fins and heat pipes for improved heat dissipation. It is only used together with system units that do not have fan kits.
- Available
-
- 5AC901.HS01-01
- APC910 passive heat sink QM170/HM170
- Available
-
- 5AC901.I232-00
- Interface card, 1x RS232 interface, For APC910/PPC900/APC3100/PPC3100
- Available
-
- 5AC901.I485-00
- Interface option 5AC901.I485-00 is equipped with an RS232/RS422/RS485 interface. The operating mode (RS232/RS422/RS485) is selected automatically depending on the electrical connection.
- Available
-
- 5AC901.ICAN-00
- Interface option 5AC901.ICAN-00 is equipped with a CAN bus master interface.
- Available
-
- 5AC901.ICAN-01
- Interface card, 1x CAN interface (SJA1000), For APC910/PPC900/APC3100/PPC3100
- Available
-
- 5AC901.ICOV-00
- Interface covers
- Available
-
- 5AC901.IETH-00
- Interface card, 1x ETH 10/100/1000, For APC910/PPC900/APC3100/PPC3100
- Available
-
- 5AC901.IHDA-00
- Interface option 5AC901.IHDA-00 is equipped with an HDA sound chip with externally accessible MIC, Line IN and Line OUT channels.
- Available
-
- 5AC901.IPLK-00
- Interface card, 1x POWERLINK interface, 2 MB SRAM, For APC910/PPC900/APC3100/PPC3100
- Available
-
- 5AC901.IRDY-00
- Ready relay 5AC901.IRDY-00 is switched as soon as the B&R industrial PC has started up and all internal supply voltages are applied. It is possible to connect additional devices to the ready relay; they will also be switched on when the B&R industrial PC starts up.
- Available
-
- 5AC901.ISIO-00
- The ready relay function of IF option 5AC901.ISIO-00 can be controlled using the MTCX. Corresponding commands must be issued by the MTCX in order to switch the ready relay. In addition to the ready relay function, the reset and power button as well as the power LED of the APC910/PPC900 or APC3100/PPC3100 can be routed externally.
- Available
-
- 5AC901.ISRM-00
- Interface option 5AC901.ISRM-00 is equipped with 2 MB SRAM.
- Available
-
- 5AC901.IUPS-00
- UPS IF option 5AC901.IUPS-00 used together with battery unit 5AC901.BUPS-00 allows the B&R industrial PC to be switched off properly without data loss during a power failure.
- Available
-
- 5AC901.IUPS-01
- UPS IF option 5AC901.IUPS-01 used together with battery unit 5AC901.BUPS-01 allows the B&R industrial PC to be switched off properly without data loss during a power failure.
- Available
Trusted by…
Trusted by industry leaders
Trusted by industry leaders
