B&R from Foxmere

- Part Number
- Description
- Availability
- 5ACCMA00.0000-000
- AP5000 swing arm mounting unit
- Available
- 5ACCMA00.0001-000
- The mounting unit is installed on the back of the panel. It protects the installed link module / system unit, enabling IP 65 protection for the complete system. The flange is installed on the mounting unit. Due to the symmetrical design of the back of the panel, it is possible to install the mounting unit in 2 directions. If a flange is selected for mounting, flange output is possible towards the top or bottom. A USB interface is available on the side of the mounting unit for service purposes.
- Available
- 5ACCMA00.0002-000
- AP5000 swing arm mounting unit, 2x rear USB interface
- Available
- 5ACCMA00.0100-000
- HMI VESA IP54 mounting unit, Leak tightness is only provided with suitable cable grommets.
- Available
- 5ACCMA00.0101-000
- HMI VESA IP54 mounting unit w/USB, Leak tightness is only provided with suitable cable grommets.
- Available
- 5ACCMA01.0100-000
- AP5000 VESA mounting unit IP10/IP20, IP20 with 5AP5120.*-000, IP10 with 5AP5130.*-000, 5AP5230.*-000
- Available
- 5ACCMB20.0000-000
- APC2200 L-bracket (mounting bracket)
- Available
- 5ACCMS01.MDT2-000
- Adapter card for M.2 mass storage device, For APC3100/PPC3100/APC4100
- Available
- 5ACCMSM2.0512-000
- 512 GB M.2 SSD MLC, Innodisk, SATA
- Available
- 5ACCMSM2.1024-000
- 1 TB M.2 SSD MLC, Innodisk, SATA
- Available
- 5ACCRHMI.0000-000
- HMI grounding clip
- Available
- 5ACCRHMI.0001-000
- Retaining clips 16 mm, 14 pcs. with 16 mm setscrews, For AP1000 and AP9x3
- Available
- 5ACCRHMI.0002-000
- Retaining clips 20 mm, 14 pcs. with 20 mm setscrews, For AP1000 and AP9x3
- Available
- 5ACCRHMI.0003-000
- Retaining clips 25 mm, 12 pcs. with 25 mm setscrews, For AP1000 and AP9x3
- Available
- 5ACCRHMI.0006-000
- HMI installation tool for control cabinet, 1x torque wrench 0.4, 2.0 Nm, 1x hex head bit 2.5, length 89 mm, 1x hex head bit 3.0, length 89 mm, 1x hex head bit 5.0, length 89 mm, 1x Torx 10 bit, length 90 mm, 1x Torx 20 bit, length 89 mm
- Available
- 5ACCRHMI.0007-000
- HMI installation tool for swing arm:, 1x torque wrench 0.4, 2.0 Nm, 1x torque wrench 2.0, 10.0 Nm, 1x hex head bit 3.0, length 89 mm, 1x hex head bit 5.0, length 89 mm, 1x Torx 10 bit, length 90 mm, 1x Torx 20 bit, length 89 mm, 1x Torx 25 bit, length 89 mm, 1x Torx 30 bit, length 89 mm
- Available
- 5ACCRHMI.0011-000
- Strain relief USB, For APC2100/APC2200, For SDL3 Converter/SDL4 Converter
- Available
- 5ACCRHMI.0016-000
- FT50 cable installation tool
- Available
- 5ACCRHMI.0017-000
- HMI FT50 installation kit
- Available
- 5ACCRPC2.0000-000
- PPC2100/2200 mounting screws kit, 4x screw M3x34 mm, 2x special screw for PPC2100
- Available
- 5ACCRPC2.0001-000
- xPC2100/2200 interface covers, 1x cover set
- Available
- 5ACCRPC2.0002-000
- xPC2200 CFast cover
- Available
- 5ACCRPC2.0003-000
- xPC2200 battery compartment, 1x battery holder for xPC2200, 1x battery including circuit board
- Available
- 5ACCRPC2.0007-000
- APC2100/2200 front cover, Orange, With logo
- Available
- 5ACCRPC2.0008-000
- APC2100/APC2200 front cover, Gray, With logo
- Available