-
- Part Number
- Description
- Availability
-
- 581100 (PSEN se SU AM1 65)
- The sensing unit on the SafetyEYE consists of three cameras. Similar to IEC 61496-1: sensing device part of the electro-sensitive protective equipment (ESPE) which uses electro-sensitive means to determine the event or state that the ESPE is intended to detect Incl. adapter and screws
- Available
-
- 581101 (PSEN se AU AM1)
- The analysis unit is where the image data is evaluated and the results (e.g. violation of a detection zone) are reported to the programmable safety system. For 19 inch control cabinet installation fan unit is mounted at the rear side
- Available
-
- 581103 (PSEN se Cable FO 30)
- Data/supply voltage cable sensing device, FOC ready-made Length: 30 m.
- Available
-
- 581104 (PSEN se Cable FO 50)
- Data/supply voltage cable sensing device, FOC ready-made Length: 50 m.
- Available
-
- 581111 (PSEN se Cable ETH Patch 5)
- Screened Ethernet patch cable, analysis unit - configuration PC, length: 5 m.
- Available
-
- 581112 (PSEN se Cable ETH Patch 1)
- Screened Ethernet patch cable, analysis unit - PSS, Length: 1 m.
- Available
-
- 581150 (PSEN se PA 250)
- Swivel arm sensing device, Length: 250 mm, d = 30 mm.
- Available
-
- 581160 (PSEN se SM 6)
- PSEN SafetyEYE setup markers, Position 1- 6 m, 5 pcs.
- Available
-
- 581161 (PSEN se SM 10)
- PSEN SafetyEYE setup markers, Position 4- 10 m, 5 pcs.
- Available
-
- 581170 (PSEN se RM 6)
- PSEN SafetyEYE reference markers, Position 1- 5 m, 6 pcs.
- Available
-
- 581171 (PSEN se RM 10)
- PSEN SafetyEYE reference markers, Position 4- 9 m, 6 pcs.
- Available
-
- 581182 (PSEN se TO Body 140mm)
- PSEN SafetyEYE test object, body resolution d = 140 mm.
- Available
-
- 581190 (PIT si 3.1)
- PITsign indicator light unit red, yellow, green including LED, mountingfoot, conduit pipe (250 mm), UB = 24 V DC, protection type housing: IP65, tosignal various operating or plant statuses.
- Available
-
- 581200 (PSEN se AU Rear Mount)
- Back wall mounting bracket of the SafetyEYE analysis unit. (including screws).
- Available
-
- 581250 (SafetyEYE Configurator CD + Handbook)
- SafetyEYE Configurator CD + manuals.
- Available
-
- 581250D
- Safetyeye Configurator Cd
- Available
-
- 583002 (PSENvip RL D M Set)
- Complete set PSENvip, consisting of: PSENvip RL D M, PSENvip T, PSENvip AP, PSENvip AT mag, PSENvip TP, PSENvip TN. With bending anglemeasurement PL e SIL 3. Approved in accordance with IEC 61496-1 and EN 12622.
- Available
-
- 583040 (PSEN vip standard package)
- Available
-
- 583200 (PSENvip TP)
- PSENvip test piece for regular function check.
- Low Stock
-
- 583202 (PSENvip AP)
- Set of adjustment plates for PSENvip sender and receiver.
- Low Stock
-
- 583205 (PSENvip MB)
- 1x set adapter pieces for mounting PSENvip AP on to any bracket.
- Low Stock
-
- 583206 (PSENvip MS)
- 1x set supporting arms for installing PSENvip on a press. Additionally requires PSENvip MB (583205).
- Low Stock
-
- 583210 (PSENvip AS2)
- Set of mounting plates for transmitter PSENvip E and receiver PSENvip R.
- Low Stock
-
- 583211 (PSENvip AP2)
- Set of mounting plates for transmitter PSENvip E and receiver PSENvip R.
- Low Stock
-
- 583215 (PSENvip AS2 R)
- Adjustment plate with accessory for receiver PSENvip R.
- Low Stock
Trusted by…
Trusted by industry leaders
Trusted by industry leaders
