-
- Part Number
- Description
- Availability
-
- 2009-191
- Group marker carrier, gray
- Available
-
- 2009-192
- Group marker carrier, gray
- Available
-
- 2009-193
- Group marker carrier, gray
- Available
-
- 2009-196
- Group marker carrier, gray
- Available
-
- 2009-198
- Adaptor, gray
- Available
-
- 2009-304
- Busbar carrier, not suitable for use as end stop, for DIN 35 rail, 1.5 mm thick, blue
- Available
-
- 2009-305
- Busbar carrier, with end stop function and detachable separator plate, for DIN 35 rail, 7.5 mm thick, blue
- Available
-
- 2009-309
- Operating tool, Blades: 3.5 x 0.5 mm and 2.5 x 0.4 mm, for TOPJOBS installation terminal blocks
- Available
-
- 2009-310
- Operating tool, Blades: 3.5 x 0.5 mm and 5.5 x 0.8 mm, for TOPJOBS installation terminal blocks, green
- Available
-
- 2009-412
- Push-in type wire jumper, insulated, 60 mm long, black
- Available
-
- 2009-414
- Push-in type wire jumper, 1.5 mm², insulated, 110 mm long, black
- Available
-
- 2009-416
- Push-in type wire jumper, 1.5 mm², insulated, 250 mm long, black
- Available
-
- 2009-515
- WMB-Inline, for Smart Printer, 900 pieces on roll, stretchable 5 - 5.2 mm, plain, snap-on type, white
- Available
-
- 2009-615
- WMB-Inline, for Smart Printer, 1200 pieces on roll, stretchable 5 - 5.2 mm, plain, snap-on type, white
- Available
-
- 201-601
- Transformer Terminal Block, Open Solder Lug, With Self-rising Clamping Plates
- Available
-
- 201-621
- Transformer Fuse Terminal Block, Open Solder Lug With Self-rising Clamping Plates Gray
- Available
-
- 201-622
- Transformer Fuse Terminal Block, Open Solder Lug, With Self-rising Clamping Plates, Fuse Carrier, Orange
- Available
-
- 201-623
- Fuse Holder Grey
- Available
-
- 201-624
- Fuse Holder Orange
- Available
-
- 2010-100
- Finger guard, touchproof cover protects unused conductor entries, yellow
- Available
-
- 2010-115
- Protective warning marker, for 5 terminal blocks, with high-voltage symbol, black, yellow
- Available
-
- 2010-1201
- 2-conductor through terminal block, 10 mm², suitable for Ex e II applications, side and center marking, for DIN-rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP, 10,00 mm², gray
- Available
-
- 2010-1202
- 2-conductor through terminal block, 10 mm², suitable for Ex e II applications, side and center marking, for DIN-rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP, 10,00 mm², orange
- Available
-
- 2010-1203
- 2-conductor through terminal block, 10 mm², suitable for Ex e II applications, side and center marking, for DIN-rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP, 10,00 mm², red
- Available
-
- 2010-1204
- 2-conductor through terminal block, 10 mm², for Ex e II and Ex i applications, side and center marking, for DIN-rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP, 10,00 mm², blue
- Available
Trusted by…
Trusted by industry leaders
Trusted by industry leaders
