B&R from Foxmere

- Part Number
- Description
- Availability
- X20DC1073
- The module is equipped with a SinCos encoder interface. The input signals are monitored. This makes it possible to detect open or shorted lines as well as encoder supply failures. SinCos encoders SinCos encoders with 1 Vss are mostly used in linear drives and systems with high-resolution optical or magnetic position measurement systems. The module can process input signals with a frequency of up to 400 kHz. NetTime timestamp for the position It is not just the position value that is important for highly dynamic positioning tasks, but also the exact time the position is measured. The module is equipped with a NetTime function for this that supplies a timestamp for the recorded position with microsecond accuracy. The timestamp function is based on synchronized timers. If a timestamp event occurs, the module immediately saves the current NetTime. After the respective data is transferred to the CPU, including this precise moment, the CPU can then evaluate the data using its own NetTime (or system time), if necessary.
- Available
- X20DC1176
- This module is equipped with 1 input for ABR incremental encoders with output signals in accordance with RS422 and 5 V encoder supply. The incoder inputs are monitored (A, B, R, A\, B\, R\).
- Available
- X20DC1178
- This module is equipped with 1 input for SSI absolute encoders with 5 V encoder signal. The data signal is monitored (Data, Data\).
- Available
- X20DC1196
- The module is equipped with 1 input for an ABR incremental encoder with 5 V encoder signal.
- Available
- X20DC1198
- This module is equipped with one input for SSI absolute encoders with 5 V encoder signal.
- Available
- X20DC11A6
- The module is equipped with 1 input for an ABR incremental encoder with RS422-based output signals and 5 V encoder supply. The encoder inputs are monitored (A, B, R, A\, B\, R\).
- Available
- X20DC1376
- The module is equipped with 1 input for an ABR incremental encoder with 24 V encoder supply. The encoder inputs are monitored (A, B, R). The module is suitable for incremental encoders with push-pull outputs with no complementary signal.
- Available
- X20DC137A
- The module is equipped with 1 input for an ABR incremental encoder with 24 V encoder supply. The encoder inputs are monitored (A, B, R, A\, B\, R\). The module is suitable for incremental encoders with symmetrical push-pull outputs. The plug-in module does not come equipped with line terminating resistors. For this reason, it is possible to connect encoders with low output current; nevertheless, the module is suitable only for low counter frequencies or short encoder cables due to possible line reflections.
- Available
- X20DC1396
- The module is equipped with 1 input for an ABR incremental encoder with 24 V encoder signal.
- Available
- X20DC1398
- This module is equipped with one input for SSI absolute encoders with 24 V encoder signal.
- Available
- X20DC1976
- The module is equipped with 1 input for an ABR incremental encoder with 5 V encoder supply. The encoder inputs are monitored (A, B, R). The module is suitable for incremental encoders with push-pull outputs with no complementary signal.
- Available
- X20DC2190
- This module can be used to determine paths and to calculate speeds at the same time. The ultrasonic transducer rods are connected directly to the RS422 interface. Communication to the transducer rod takes place using start/stop signals. With the DPI/IP protocol, it is also possible, for example, to read operational properties directly from the transducer. During service (when a transducer is being exchanged) the machine can be started again quickly without additional configuration work. The module is designed for connecting 2 transducer rods with a total of up to 4 paths. That means, for example, that 2 ultrasonic transducers with 2 magnets each or one with 4 magnets can be used. The combination 3/1 is also possible. The module provides 24 VDC as an external supply for the sensor.
- Available
- X20DC2395
- This module is a multifunctional counter module. It can be connected to one SSI encoder, one ABR encoder, two AB encoders or four event counters. Two outputs are available for pulse width modulation. The functions can also be mixed.
- Available
- X20DC2396
- The module is equipped with two inputs for an ABR incremental encoder with 24 V encoder signal.
- Available
- X20DC2398
- This module is equipped with two inputs for SSI absolute encoders with 24 V encoder signal.
- Available
- X20DC4395
- This module is a multifunctional counter module. It can be connected to two SSI encoders, two ABR encoders, four AB encoders or eight event counters. Four outputs are available for pulse width modulation. The functions can also be mixed.
- Available
- X20DI0471
- The module is equipped with 10 inputs for 1-wire connections. It is designed for a nominal voltage of 5 to 48 VDC.
- Available
- X20DI2371
- The module is equipped with 2 inputs for 3-wire connections. This module is designed for X20 6-pin terminal blocks. If needed (e.g. for logistical reasons), the 12-pin terminal block can also be used.
- Available
- X20DI2372
- The module is equipped with 2 inputs for 3-wire connections. This module is designed for X20 6-pin terminal blocks. If needed (e.g. for logistical reasons), the 12-pin terminal block can also be used.
- Available
- X20DI2377
- The module is equipped with two inputs for 3-wire connections. Both inputs can be configured as event counters. Gate measurement is only ever possible on one channel. This module is designed for X20 6-pin terminal blocks. If needed (e.g. for logistical reasons), the 12-pin terminal block can also be used.
- Available
- X20DI2653
- The module is equipped with 2 inputs for 3-wire connections. It is designed for an input voltage of 100 to 240 VAC.
- Available
- X20DI4371
- The module is equipped with 4 inputs for 3-wire connections.
- Available
- X20DI4372
- The module is equipped with 4 inputs for 3-wire connections.
- Available
- X20DI4375
- The module is equipped with 4 inputs for 3-wire connections. It has open circuit and short circuit detection. This detection can be switched off individually for each channel.
- Available
- X20DI4653
- The module is equipped with 4 inputs for 2-wire connections. It is designed for an input voltage of 100 to 240 VAC.
- Available