B&R from Foxmere

- Part Number
- Description
- Availability
- X20DO4633
- The module is a digital output module with phase-angle control that is equipped with 4 Triac outputs using 2-line connections. The supply (L and N) is fed directly to the module.
- Available
- X20DO4649
- The module is equipped with 4 relay outputs.
- Available
- X20DO4F49
- This module is equipped with 4 relay outputs. It can switch DC voltages up to 250 VDC and is therefore suitable for use in power generation systems.
- Available
- X20DO6321
- The module is equipped with 6 outputs for 1 or 2-wire connections. The X20 6-pin terminal block can be used for universal 1-line wiring. 2-line wiring can be implemented using the 12-pin terminal block. The X20DO6321 is designed for sink output wiring.
- Available
- X20DO6322
- The module is equipped with 6 outputs for 1 or 2-wire connections. The X20 6-pin terminal block can be used for universal 1-line wiring. 2-line wiring can be implemented using the 12-pin terminal block. The module is designed for source output wiring.
- Available
- X20DO6325
- The module is equipped with six outputs for 1 or 2-wire connections with diagnostic functions. The X20 6-pin terminal block can be used for universal 1-line wiring. Two-line wiring can be implemented using the 12-pin terminal block. The outputs on the module are designed for source connections.
- Available
- X20DO6529
- The module is equipped with 6 relay outputs.
- Available
- X20DO6639
- The module is equipped with 6 relay outputs.
- Available
- X20DO8232
- The module is equipped with 8 outputs for 1-wire connections. The nominal output current is 2 A and the nominal voltage is 12 VDC. The output supply is fed directly to the module. An additional supply module is not needed. There is no connection between the module and the I/O supply potential on the bus module.
- Available
- X20DO8322
- The module is equipped with 8 outputs for 1-wire connections and designed for source output wiring.
- Available
- X20DO8323
- The module is an electrically isolated 8-channel digital output module. It can be configured as high-side or low-side or as a push/pull output for controlling 12 to 24 VDC DC motors.
- Available
- X20DO8331
- The module is equipped with 8 outputs for 1-wire connections. The rated output current is 2 A. The output supply is fed directly to the module. An additional supply module is not needed. There is no connection between the module and the I/O supply potential on the bus module.
- Available
- X20DO8332
- The module is equipped with 8 outputs for 1-wire connections. The rated output current is 2 A. The output supply is fed directly to the module. An additional supply module is not needed. There is no connection between the module and the I/O supply potential on the bus module.
- Available
- X20DO8332-1
- The module is equipped with 8 outputs for 1-wire connections. The nominal output current is 2 A. The output power supply is fed directly into the module. An additional power supply module is therefore not necessary. There is no connection between the module and the I/O power supply potential on the bus module.
- Available
- X20DO9321
- The module is equipped with 12 outputs for 1-wire connections. The module is designed for sink output wiring.
- Available
- X20DO9322
- The module is equipped with 12 outputs for 1-wire connections. The module is designed for source output wiring.
- Available
- X20DOD322
- The X20DOD322 module is equipped with eight outputs for 1-wire or 2-wire connections. The X20DOD322 is designed for source output wiring.
- Available
- X20DOF32
- Digital output module with 16 outputs rated at 24V DC, 0.5A.
- Available
- X20DOF321
- The module is equipped with 16 outputs for 1-wire connections. The module is designed for a sink output circuit.
- Available
- X20DOF322
- The module is equipped with 16 outputs for 1-wire connections. The module is designed for source output wiring.
- Available
- X20DS1119
- This module is a multifunction digital signal processor module. It can be used extremely flexibly for a wide variety of tasks involving digital signal processing or digital signal generation. Two primary example applications include controlling stepper output stages with pulse and direction signals or using as encoder emulation. In this application, for example, frequency inverters or servo axes with the speed follow function can follow a real or virtual master axis. An additional major feature is the module's integrated timestamp function. It allows counter ramps curves to be generated virtually independently of bus cycle times during encoder emulation, for example. Only the target counter value and moment when it should be reached are transferred. The module automatically generates the corresponding counter values at the appropriate time, precisely in microsecond resolution and independently of the bus clock.
- Available
- X20DS1319
- This module is a multifunction digital signal processor module. It can be used extremely flexibly for a wide variety of tasks involving digital signal processing or digital signal generation. Two primary example applications include controlling stepper output stages with pulse and direction signals or using as encoder emulation. In this application, for example, frequency inverters or servo axes with the speed follow function can follow a real or virtual master axis. An additional essential feature is the module's integrated timestamp function. It allows counter ramps curves to be generated virtually independently of bus cycle times during encoder emulation, for example. Only the target counter value and moment when it should be reached are transferred. The module automatically generates the corresponding counter values at the appropriate time, precisely in microsecond resolution and independently of the bus clock.
- Available
- X20DS1828
- The module is equipped with 1 HIPERFACE encoder interface. This module can be used to evaluate encoders installed in motors from other manufacturers as well as encoders for external axes (encoders that sample any machine movement). The input signals are monitored. This makes it possible to detect open or shorted lines as well as encoder supply failures.
- Available
- X20DS1928
- The module is equipped with an EnDat encoder interface. The module automatically detects whether an encoder is connected with EnDat 2.1 or EnDat 2.2. This module can be used to evaluate encoders installed in B&R servo motors as well as encoders for external axes (encoders that scan any machine movement). The input signals are monitored. This makes it possible to detect open or shorted lines as well as encoder supply failures.
- Available
- X20DS4389
- This module is a digital signal processor module that is used for detecting and evaluating input edges and for creating edges. An additional essential feature is the module's integrated timestamp function. This allows fast input edges such as registration marks to be detected independently of the system's X2X Link cycle time and provided with a precise input stamp. In the other direction, the module sets outputs at exactly specified times. This is done with a resolution up to 125 ns. In oversampling mode, the module acquires very short input patters whose low or high phases are shorter than the X2X Link cycle time. Similarly, output patterns (e.g. drum sequencers) can also be output with extremely short high/low times. Oversampling can take place with a scan rate of up to 25 μs. If necessary, up to 4 events per edge detection unit can be stored in a buffer (history elements). Other functions include pulse duration measuring and differential time measuring.
- Available