B&R from Foxmere

- Part Number
- Description
- Availability
- X20HB28G0
- X20 EtherCAT Junction Module
- Available
- X20HB8815
- The POWERLINK TCP/IP gateway enables the exchange of all types of application data (HMI, diagnostics, parameter data, etc.) between a POWERLINK V2 network and a TCP/IP network. It functions like a layer 2 switch, with the exception that cyclic POWERLINK packets are not routed to the ETH port. With respect to the functionality of layer 2 switches, it should be mentioned that the gateway uses the store-and-forward principle. Gateway functionality doesn't need to be configured separately. When the gateway receives a frame, it saves the MAC address of the sender and the corresponding interface in the source address table (SAT). If the destination address is found in the SAT, the gateway routes the frame to the corresponding interface. Frames with a broadcast or multicast address are always routed to all interfaces. When IP packets are received at the "ETH" port that are larger than the MTU configured for POWERLINK, they are fragmented, if permitted. POWERLINK is a standard protocol for Fast Ethernet equipped with hard real-time characteristics. The POWERLINK Standardization Group (EPSG, see www.ethernet-powerlink.org) ensures its openness and continual development. The bus modules expanded to the left allow connection of up to 2 hub expansion modules in addition to the gateway. This means that a basic device provides up to 2 POWERLINK ports.
- Available
- X20HB8880
- The X20 hub is a device that can be used universally in standard Ethernet networks or POWERLINK networks. It is suitable for 100 Mbit/s (Fast Ethernet) networks. The bus modules expanded to the left allow connection of up to 2 hub expansion modules in addition to the hub base module. This means that a single base device provides up to 6 hub interfaces.
- Available
- X20HB8884
- POWERLINK is a standard protocol for Fast Ethernet with hard real-time properties. The Ethernet POWERLINK Standardization Group (EPSG) ensures that the standard remains open and is continually developed. www.ethernet-powerlink.org Systems with redundant cabling can be implemented easily using POWERLINK. Unlike ring redundancy, cable redundancy does not require cable looping, which can sometimes be problematic. This allows the creation of all types of tree structures. When using a device with the link selector function, data is always transferred via the highest quality network lines. The link selector function is integrated in the module compact link selector. This makes it easy to connect any POWERLINK device to a redundant POWERLINK network.
- Available
- X20HB88G0
- X20 Hub EtherCAT Junction
- Available
- X20IF 1082-2
- X20 interface module, 1 POWERLINK interface, managing or controlled node, integrated 2-port hub, ring redundancy function, PRC function
- Available
- X20IF0000
- Covers for unused interface module slots are included with X20 CPUs. If an X20 system is used in a maritime environment, then the system will be subjected to increased vibration fatigue. In order to achieve the stability necessary for operation, the X20IF0000 dummy interface module from the X20 series is used instead of the covers.
- Available
- X20IF1020
- The interface module can be used to expand the X20 CPU for specific applications. It is equipped with an RS232 interface.
- Available
- X20IF1030
- The interface module can be used to expand the X20 CPU for specific applications. It is equipped with an RS485/RS422 interface.
- Available
- X20IF1041-1
- The interface module is equipped with a CANopen interface. This allows third-party components to be integrated in the B&R system and makes it possible to quickly and easily transfer data in both directions. The interface module can be operated in X20 CPUs or in the expandable POWERLINK bus controller X20BC1083.
- Available
- X20IF1043-1
- The interface module is equipped with a CANopen (slave) interface. This allows the B&R system (I/O modules, POWERLINK, etc.) to be connected to systems from other manufacturers and makes it possible to quickly and easily transfer data in both directions. The interface module can be operated in X20 CPUs or in the expandable POWERLINK bus controller X20BC1083.
- Available
- X20IF1051-1
- The interface module is equipped with a DeviceNet scanner interface. This allows third-party components to be integrated in the B&R system and makes it possible to quickly and easily transfer data in both directions. The interface module can be operated in X20 CPUs or in the expandable POWERLINK bus controller X20BC1083.
- Available
- X20IF1053-1
- The interface module is equipped with a DeviceNet interface. This allows the B&R system (I/O modules, POWERLINK, etc.) to be connected to systems from other manufacturers and makes it possible to quickly and easily transfer data in both directions. The interface module can be operated in X20 CPUs or in the expandable POWERLINK bus controller X20BC1083.
- Available
- X20IF1061
- The interface module can be used to expand the X20 CPU for specific applications. It is equipped with a PROFIBUS DP V1 master interface.
- Available
- X20IF1061-1
- The interface module is equipped with a PROFIBUS DP V1 interface. This allows third-party components to be integrated in the B&R system and makes it possible to quickly and easily transfer data in both directions. The interface module can be operated in X20 CPUs or in the expandable POWERLINK bus controller X20BC1083.
- Available
- X20IF1063
- X20 interface module, 1 PROFIBUS DP V0 slave interface, max. 12 Mbit/s, electrically isolated
- Available
- X20IF1063-1
- The interface module is equipped with a PROFIBUS DP V1 interface. This allows the B&R system (I/O modules, POWERLINK, etc.) to be connected to systems from other manufacturers and makes it possible to quickly and easily transfer data in both directions. The interface module can be operated in X20 CPUs or in the expandable POWERLINK bus controller X20BC1083.
- Available
- X20IF1065
- The interface module can be used to expand the X20 CPU for specific applications. It is equipped with a PROFIBUS DP V1 slave interface.
- Available
- X20IF1072
- The interface module can be used to expand the X20 CPU for specific applications. It is equipped with a CAN bus interface.
- Available
- X20IF1074
- The module is an interface module for the X20 fieldbus CPU.
- Available
- X20IF1082
- The interface module can be used to expand the X20 CPU for specific applications. It is equipped with an POWERLINK interface. The interface has two RJ45 sockets. Both connections lead to an integrated hub. This makes it easy to create daisy-chain connections using POWERLINK.
- Available
- X20IF1086-2
- The interface module can be used to expand the X20 CPU for specific applications. It is equipped with an POWERLINK interface. This interface uses a 100 Base-FX port. The POWERLINK connection is made using 62.5/125 μm or 50/125 µm fiber optic multimode cable with a duplex LC connection. The module and network status is indicated using LEDs.
- Available
- X20IF1091
- The interface module can be used to expand the X20 CPU for specific applications. It is equipped with an X2X Link master interface.
- Available
- X20IF1091-1
- The interface module is operated in the X20BC1083 expandable bus controller. It is equipped with an X2X Link master interface.
- Available
- X20IF10A1-1
- The interface module is equipped with an ASi master interface. This allows third-party components to be integrated in the B&R system and makes it possible to quickly and easily transfer data in both directions. The interface module can be operated in X20 CPUs or in the expandable POWERLINK bus controller X20BC1083.
- Available

Trusted by…

Trusted by industry leaders